Targets per line and shift
Set daily, shift and hourly targets for each line, or pull them from your ERP.
Heartbeat production dashboard
Heartbeat is a factory floor dashboard. It counts what each line produces, compares it with the target for the hour, the shift and the day, and shows production efficiency on screens your team can see. The same system handles the ins and outs for your AGVs: doors, lifts, conveyors and call buttons.
Sample screen for illustration. Efficiency = actual output ÷ target output for the same period × 100.
Production efficiency
Efficiency = actual output ÷ target output × 100
Both figures cover the same period. Line 2 had a target of 1,200 units by 14:00 and made 1,080, so its efficiency is 1,080 ÷ 1,200 × 100 = 90%.
Planners set targets per line, per shift and per hour, or Heartbeat takes them from your ERP. Sensors and PLC signals count every unit in and out of each line. Heartbeat compares the two all through the day, so a line that falls behind shows up within the hour, not at the end of the shift.
Floor screens show each line in green, amber or red against thresholds you choose. Supervisors see the same view on a tablet, and managers get daily and shift reports.
What it does
Set daily, shift and hourly targets for each line, or pull them from your ERP.
Sensors and PLC signals count units in and out of each line as they happen.
Actual against target for the hour, the shift and the day, per line and for the plant.
The tile turns amber or red and the supervisor gets an alert when a line drops below its threshold.
Large screens on the floor, plus tablet and PC views for supervisors and managers.
The same gateway opens doors, calls lifts and starts conveyors for your AGVs.
How it connects
Ins and outs
Rules
Rules are set up in the software. A few examples:
When Line 2 drops below 90% of its hourly target
Then its tile turns red on the floor screen and the line supervisor gets an alert
When a shift ends
Then Heartbeat saves target, actual and efficiency per line for the shift report
When the end-of-line sensor reports a full bin
Then an AGV is dispatched to swap it for an empty one
When an AGV docks at the conveyor
Then the conveyor starts, transfers the load, and stops
When an AGV needs to reach level 3
Then Heartbeat calls the service lift, the AGV rides up and releases the lift on arrival
When an AGV approaches a forklift crossing
Then the crossing light turns red for forklifts until it has passed
AGV monitoring
Each AGV sends a heartbeat at a regular interval with its location, battery level, current job and health data. If an AGV stops reporting, or a reading goes out of range, the system raises an alert straight away.
The same data feeds our Lifetime Service Program, so we can often spot a worn part before it causes a stop.