Book transport robot

Book transport robot for libraries

Returned books have to get from the desk to sorting and back out to the shelves, often across floors. The BeeBotic book transport robot carries up to 100 kg per trip on the routes you set, so staff stop pushing carts and spend the time on shelving and readers.

New design · launching Q1 2027BeeBotic LR-2 book transport robot, new design
100 kgLoad per trip
MappedPickup and drop-off points
Web appSend and track trips
Lift readyBetween floors where the building allows

Use cases

Where a transport robot saves trips

Returns to sorting

Clear the returns desk or book drop to the sorting room on a schedule.

Sorting to shelves

Take sorted carts out to each floor for reshelving.

Between levels

Move carts between floors without staff riding the lift.

Inter-branch prep

Bring holds and transfer items to the dispatch point.

Processing

Move new stock from acquisitions and processing to the floor.

After hours

Run trips after closing so carts are ready when staff arrive.

How it works

Load, send, done

  1. Load

    Staff load books on the robot's cart.

  2. Send

    Pick the destination in the web app.

  3. Drive

    The robot follows its mapped route and avoids people.

  4. Arrive

    It waits at the drop-off point until the cart is unloaded.

  5. Return

    It goes back to its station or charger.

Design

New BeeBotic design from Q1 2027

From the first quarter of 2027 the robot ships in BeeBotic's own casing. Robots delivered before then come in the current design. The robot hardware, software and local service are the same in both. Only the casing changes.

BeeBotic LR-2 book transport robot, new design
New BeeBotic designLaunching Q1 2027

Accessory

A2 book cart

A two-shelf book cart in the same finish as the robot, with tilted shelves so books stay put on the move and braked castors for loading.

BeeBotic A2 book cart

FAQ

Book transport robot questions

Something else? Ask us directly.

How much can the book transport robot carry?

Up to 100 kg per trip, which is a full cart of returned books.

How do staff send it somewhere?

Staff load the cart, pick a destination in the web app, and the robot drives there on a mapped route. Pickup and drop-off points are set when we map the library.

Can it go between floors?

Where the building allows, we connect the robot to the lift so it can travel between levels. We check the lift during the site survey.

Is it safe around readers?

Yes. It slows down and stops for people in its path, and it keeps to the routes and zones set on the map.

Does it need RFID tags?

No. The transport robot works with any collection, tagged or not.

Tell us your returns route. We will map the first trip.

Get a quote