Warehouse automation: a practical guide for growing warehouses

Warehouse automation does not have to mean a fully robotic warehouse with tall shuttle systems. For most growing warehouses, the best returns come from automating the boring, repeated moves first.
Where the time goes in a warehouse
Look at a typical shift and you will see people:
- Moving goods from receiving to storage.
- Walking to pick locations and back.
- Moving picked orders to packing.
- Moving packed orders to dispatch.
- Returning empty pallets, carts and totes.
Much of this is horizontal transport between fixed points. AGVs are built for this kind of transport.
The main types of warehouse robots
- AGVs follow fixed routes and move carts, pallets and totes between stations. Good for repeated flows.
- AMRs plan their own paths. Good for variable picking routes. See AGV vs AMR.
- Automated forklifts handle pallets at height.
- Conveyors and sorters move high volumes along one fixed line.
- Goods-to-person systems bring storage to the picker. Powerful, but a big investment.
Start with transport, not storage
Automated storage systems change the whole building. Automated transport does not. Tape-guided AGVs run on your existing floor, tow your existing carts, and can lift to rack height with a scissor lifter. You can start with one route and add vehicles as volume grows.
Five flows worth automating first
- Receiving to storage zone. Pallets or carts from the dock to put-away.
- Picking to packing. Completed pick carts to the packing stations.
- Packing to dispatch. Packed orders to the loading bay by carrier.
- Empty returns. Carts, totes and pallets back to where they start.
- Replenishment. Stock from reserve to forward pick locations.
Connect it to your WMS
The bigger gain comes when the warehouse management system triggers the moves. A completed pick in the WMS becomes an AGV job, and the job status goes back to the WMS when the cart reaches packing. Our AGV fleet management software handles this link, plus traffic control when several AGVs share aisles.
Safety in shared aisles
Most warehouses mix people, forklifts and AGVs. Plan crossings carefully. Traffic lights at forklift crossings, controlled by the AGV system, make the right of way clear. The Heartbeat system switches those lights and opens fast doors as AGVs arrive.
A sizing example
Suppose packed orders move from packing to dispatch in carts. At peak, 40 carts per hour leave packing. The route is 120 metres each way. An AGV towing two carts at a time, with loading and unloading time included, might complete a round trip in around six to eight minutes. That is roughly eight trips per hour, or 16 carts, so this flow needs about three AGVs with a little spare capacity.
Actual figures depend on speed limits, crossings and how fast carts are hooked on, so treat this as a method rather than a promise. Use the same method with your own trip counts to size the fleet.
Warehouse automation checklist
- Floor: flat, clean and in good repair along the route.
- Aisles: wide enough for the AGV and its load, plus people.
- Crossings: identified, with a plan for lights or right of way.
- Doors: fast doors or fire doors that can be triggered automatically.
- Network: Wi-Fi coverage along the whole route.
- Stations: clear pick-up and drop-off points with space to queue.
- Charging: a point near a station where AGVs wait anyway.
- System link: which WMS events should create AGV jobs.
Mistakes to avoid
- Automating a messy process. Fix the flow first, then automate it.
- Ignoring peaks. Size for the busiest hour, not the average.
- Forgetting returns. Empty carts and pallets need to come back too.
How to size the project
For each flow, count the moves in your busiest hour, the route length and the load and unload time. That gives the number of AGVs needed with some spare capacity. Our team can do this calculation with you.
Planning warehouse automation in Malaysia? Send us your peak-hour flows. See also AGVs for factory and warehouse automation.
Frequently asked questions
What is the easiest part of a warehouse to automate?
Horizontal transport between fixed points, such as receiving to storage or picking to dispatch, is usually the easiest place to start.
Do AGVs need special racking?
No. Tow and carry AGVs work with existing carts. Lifting AGVs need carts or pallets they can drive under or lift.
How many AGVs does a warehouse need?
It depends on trips per hour, route length and load time. Count your peak-hour moves and we can estimate the fleet size.


